KAC Knights Armament Company BLK 7.62 QDC/CRS-PRG
Manufacturer: Knights Armament Company
Part Number: KM121568-BLK
Product Description: The 7.62 Combat Rifle Suppressor (CRS) is specifically designed as an optimal suppressor for precision, large frame medium-caliber class rifles, with a focus on flash reduction, back pressure, reduction, and durability. Pressure Reduction Technology (PRT) minimizes back pressure, resulting in a negligible gas increase in the system that is typically responsible for bolt carrier velocity and rate-of-fire acceleration. This technology also pushes noxious. Gas is forward, away from the user, increasing comfort and reducing harmful exposure. A novel baffle design (PRG) mitigates, acoustic, and flash signature, and illuminates "first round pop" in both flash and sound, with exceptional overall flash reduction. Compatible with all KAC 7.62mm Quick Detach Coupling QDC muzzle devices.
Specifications:
- Addition to bare muzzle: 6.3” (16cm)
- Addition to QDC 3-prong FH: 5.65” (14.35cm)
- Overall length: 7.9” (20.06cm)
- Weight: 23.2oz (658g)
- Sound reduction: 26dB
Pressure Management: To reduce the negative effects of suppressor, use, pressure, reduction, technology (PRT) suppressors, release contained system, pressure forward and away from the user and operating parts early in the unlocking an extraction phase of the cycle of operation. This venting process drastically reduce his user exposure to harmful combustion gases, reduces the "blowback" effect of residual, bore pressure and decreases the internal fouling. Compared to a traditional baffle design of similar size.
Signature Reduction: In 2017 KAC began a study to determine and address the cause of first-round flash with suppressor use. While purging the suppressor with an inner gas was successful in reducing the first round flash, it would be cumbersome for practical use. The solution was found any novel baffle matrix that uses the blast pulse of the contained pressure to mechanically remove the combustible environment from the suppressor. This patent pending design effectively reduces spectrum flash, as well as near, short-wave, and mid-wave IR "Infrared"; and eliminates the need for flash suppressant in propellants. KAC's "purge" technology does not impact system pressure or sound pressure levels, but does illuminate first round flash, as well as the audible "first round pop" found with traditional suppressors.
Durability: Advancement in simulation, analysis and manufacturing processes have also contributed to increased service life of KAC’s suppressors. Thermal energy is spread through the monolithic structure on internal paths, eliminating “hot spots” that can fail during extreme use. When tested under continuous-fire protocols, the suppressors indoor 1. 5–2 times the number of rounds fired before failure; and one failure occurs, the structural design ensures that all energy is projected down range with no lateral escape of fragments or debris.
Transfer Requirements:
- In an effort to make the transfer process to your local FFL as smooth as possible, please send an email to support@nsarmory.us with the following information described below.
- In the email description please include the name you used to complete your order, as well as your invoice number
- Finaly please include in the email a copy of the FFL “Note if you are purchasing an NFA item please also include a copy of the SOT”
For more information please visit www.knightarmco.com
To view more of the Knight’s Armament Company products N.S. Armory offers please visit our Knight’s Armament Company Section!
